The drains are the plumbing system’s workhorse. Flushed waste and waste water go through these drains and are emptied into the septic system or the sewer system. As time goes by, drainage systems can be clogged with numerous elements, such as hair, accumulated grease, food particles, and other waste materials. If you let this happen and do not do anything about it, you can expect to face more serious problems. Fortunately, there are many things that you can do to ensure that this will not happen.
One of the most effective drain cleaning tips is to use a cleaning concoction that you can make right at home. This solution is a combination of vinegar and baking soda. Use this drain cleaning concoction at least once a month to ensure that your drains are kept clean and clear of clog-causing materials. In the event that your drains have already clogged, avoid using toxic and dangerous drain cleaners. Instead, you should use a plunger. If they are seriously clogged, you can use a plumbing snake.
As mentioned above, one of the best tips when it comes to cleaning the drain is to use your home made vinegar and baking soda solution. You can do this by mixing a cup (237ml) of hot vinegar, a cup (237 ml) of baking soda, and 3 to 4 quarts (2.8 to 3.8 liters) of extremely hot water. This combination will result in a chemical reaction that will push the sediments far down the drainage trap. In addition to helping you maintain a clean and clog-free drain, baking soda will also absorb and eliminate odors. The vinegar’s acidic properties, on the other hand, will counter some of the most hazardous pathogens that plague the pipes. This solution is also effective for drains that are clogged with loose debris.
In many cases of clogged rains, the best tool that you can use is your regular household plunger. This tool is placed over the drainage hole. You would have to pump it down vigorously for a number of times so that you can loosen the clogged and blocked drains. One thing to keep in mind though is that the plunger has to have good suction, so make sure that you remove the sink stopper. You should also plug the sink overflow holes with wet rags. Lastly, there should be at least 2 inches, or 5 centimeters, of water in the basin. This will provide your plunger with great suction.
If you have done all of the mentioned tips above to no avail, it may be time for you to reach for your phone and call a trusted and professional plumbing company that can efficiently do the job for you. This will save you from the hassle of preparing your own cleaning solution, especially if you have a hectic schedule. You do not have to worry because these experts know the right thing to do to keep your drainage systems clog-free.